Modeling Omega Tropic Tutorial by EL_Shadow [TeknoBrothers®]
Now, by looking on the view port's lower right corner, you'll be facing the menu shown at the picture below. As the previews picture, you'll find each tool's description.
If you forget what you see on both pictures above (what is almost impossible to happen), don't forget to scroll up. Don't forget: If you feel a need to practice the basics for a little, feel free to save your project and then reset Max. Practice until you feel yourself capable to continue and get back here.
Now that you know how to use the basics, let's get back to modeling already! There's still a lot to learn with me. I've got all the patience needed to teach beginners and semi-advanced users like me.
If you're using the 6th version of 3dsmax, then you're going to use a useful tool that helps you to quickly swing through active view port. On top view port, by holding down the "I"; key on your keyboard, drag your mouse down until you get the same or identical view as mine. Just in case you're using previews Max 6's version, use your "Pan Scan"; tool. Consult previews steps to find it.
Select those vertexes shown below and move them upwards.
By using the cutting tool, create a wire line across the windshield.
Select the three vertexes above the windshield and delete as shown below:
Notice that we'll use the cutting tool more than others. By using the cutting tool cut along the hood seem (I don't know how you call it on English):
Let's use a different tool!
Press the "2"; Key on your keyboard and you'll be using the "Edge Selection"; tool. Select the two wires and at "Selection Rollout"; press the loop button to select other wire lines belonging to the alignment.
