How to create a model of a sport car - Nissan 350-Z
Step 60
Traced therefore these lines following the direction of the arc.
Step 61
We eliminate the irregular faces.
Step 62
I have eliminated a line that did not serve to me and with a little patience I have aligned newly you concern to us.
Step 63
I have added some line of control in order to better define the surface in the important zones.
Step 64
Others two lines.
Step 65
I havedefined better the part of the beacons having traced new lines and eliminating the others.
Step 66
To this point the frontal part of the machine can be considered concluded. Tried to make the Smooth with the same formulations that you have used before, if there is something that does not convince tried to fix it to you with the instruments used in the previous passages.
Step 67
The next element of our modellazione will be nothing less than the door. Created a cube, adapted its dimensions to the blueprints, settate Subdivisions 4 Height to and Subdivions Depth to 3. Eliminated the faces of behind, of, of over, of under and those inner ones; in this way you it remains only a flat object with which we will work.
Step 68
I have aligned the several one you concern to us with the blueprints and therefore I have added to others two lines in order to define the surface better.
Step 69
With Split Polygon Tool I have always added of the control lines in order to better define the edges of the door.
