request hardware help

[xeovoex]

hi
i want to buy pc for 3d modeling&animation&rendering
but i dont know which pc detail i need for best work
i can pay 10000$ for this hardware
any body can help me to chose best choice?
thx

[xeovoex]

i heared that have complete pc pack for 3d working
for example company dell or apple (price 6000$us min to higher)
if any body working with this pc plz tell me for about thst aplication
thanks for your attention

[yanyan09]

omg thats 500,000 philippine peso. get a new car instead..

mmm buy this some kind of dual dual core thingy. or this multi some kinda processor.

[xeovoex]

know detail ???

[xeovoex]

can put in linke about super pc buy for 3d design

[yanyan09]

browse the this forum , i think iv'e read some speculations in here.

[xeovoex]

whats ur idia about this choice????????


TYAN Transport VX50 (B4881) Server
5U, 8/4-way AMD Opteron™ up to 128MB RAM & PCI-Express
Basic Standard Features
No Features Specifications
1 Motherboard • TYAN Thunder K8QW (S4881): supports four AMD Opteron™ 800 series processors
• SSI EEB (13" x 16")
2 Processor Riser Board • TYAN M4881: supports four AMD Opteron™
800 series processors (13" x 12")
3 Processor Compatibility • Support four or eight AMD Opteron™ 800 series processors
• Supports single/dual core_
4 Chipset • NVIDIA nForce™ Pro 2200 + AMD-8131™ Hyper Transport PCI-X tunnel
5 System Memory • (32) DDR DIMM sockets: (16) M4881, (16) S4881
• Support up to 128GB reg. DDR 333/266 ECC memory on 32 DIMMs (Only 64GB DDR 400 supported by
quad-processor system), Supports 4-rank memory modules
6 Expansion Slots • Two x16 PCI Express slots, one with x4 signal
• Two independent 64-bit PCI-X bus
• One 64-bit 133 MHz (3.3V) PCI-X slot
• Two 64-bit 100 MHz (3.3V) PCI-X slots_
7 Graphics • ATI® RAGE™ XL PCI graphics controller WITH 8MB Frame Buffer of video memory
8 Integrated LAN Controller
• Broadcom BCM5704C dual-channel GbE LAN
- Two RJ-45 LAN connectors with LEDs
- Connected to PCI-X Bridge A
• Two Front Panel LED headers
9 Chassis • Convertible Pedestal and 19" rack-mountable 5U chassis
• Storage bay:
- (4) 3.5" HDD SATA hot swap bays
- (4) 3.5" Internal HDD bays
Upgradeable to hot swap bays via add-on kit
- (1) Slim CD-ROM bay
- (1) Standard FDD bay
- (3) 5.25" device bay
• Dimension: 16.7"/425mm (W) x 26.8"/680mm (D) x 8.7"/220mm (H)_
10 Power Supply • 900W 2+1 for (4-way); 1350W 3+1 for (8-way)
Options
No Features Specifications Qty.
11 Processor(s) AMD Opteron 870 Dual Core 940 pin 8
12 Memory ECC Registered DDR 400 1GB 16
13 HDD SATA II 32OGB 2
14 CD-ROM/FDD Slim 24X CD-ROM 1
15 LAN Card Dual Gb LAN 1
16 Power Supply Redundant Power supply 1350W 3+1 for (8-way) 1
17

[yanyan09]

mmm . . . most parts are not of those who recently arrived in the market.
so you could atleast browse more for the latest.
and not familiar with the specs.
but if you are like buying something for industry or work purposes then i think its great if you'll buy those multi processors and dual cores.

here are my specs, buy atleast something higher than this

Mboard: Winfast NF3 250 Series 2.2GHZ to 3.0GHZ
* w/ 3 memory slots (max 3072 of RAM )
* w/ 7 USB ports
* w/ 2 PS ports

Processor: AMD Athlon64 3200
* socket 754

Memory Modules: Kingston DDR 400
* 3pcs 1G modules (equivalent to 3072 of RAM )

Video Card: ATI Radeon 9600 XT 256MB 128BIT DVI supported
* AGP slot

Sound Card: Creative Sound Blaster 5.1

Hard Drive: Maxtor 7200RPM 80G
* 2 pcs

Monitor: Viewsonic LCD Monitor 19 inch
* 1280 x 1024 standard resolution ( nearly square )

Secondary Montor: Flatron LG 17 inch
* standard pc monitor

CD ROM: Sony CD-RW CRX 230EE

DVD ROM : Lite-On DVD SOHD - 167T

Floppy Disk Drive

Speakers: Altech Lansing & Creative

Webcam: A4 Tech 339

Pen Tablet: Graphire 3


.... well thats about all my computer parts..

im actually using 2 speakers at the same time. but you can go for the surround system if you like.

[han3d]

go tayan and epox or abit or dfi for motherboard and maybe asus other motherboards i dont know
for power supply you might get enermax it is top quality
for cpu i like amd then go for something over am2 4800+
for ram at least 1 gb but it is better if you buy 2 gb or even 4 gb for 64 bit and vista
for gfx card dont go expensive stuff it doesnt help rendering in most cases but a middle range card

So you want a pc for 3d modeling and rendering and all that kinda stuff!

Well you have a lot of money to spend so you should not hold back on the expences but nothing too ott!

I recommend;

Motherboard : Asus M2n-sli
Spec-

CPU Support AMD® Socket AM2 Athlon 64 X2 / Athlo 64 FX / Athlon 64 / Sempron
AMD Cool 'n' Quiet™ Technology
AMD64 architecture enables simultaneous 32-bit and 64-bit computing
AMD Live!™ Ready
Chipset NVIDIA nForce® 570 SLI™ MCP(media and communications processor)
Front Side Bus 2000 / 1600 MT/s
Memory Dual channel memory architecture
4 x 240-pin DIMM, support max. 8GB DDR2 800/667/533 ECC and non-ECC, un-buffered memory
Expansion Slots 2 x PCI Express x16 slot at x16, x8 speed
Support NVIDIA®SLI™ technology (both at x8 mode)
2 x PCI Express x1
3 x PCI 2.2
SLI Support two identical NVIDIA SLI-Ready graphics cards (at x8, x8 mode)
ASUS two-slot thermal design
ASUS PEG Link
Storage NVIDIA nForce® 570 SLI™ MCP supports:
- 1 x Ultra DMA 133 / 100 / 66 / 33
- 6 x Serial ATA 3.0Gb/s
- NVIDIA MediaShield™ RAID supports RAID 0, 1, 0+1, 5 and JBOD span cross Serial ATA drives
JMicron JMB363 SATA controller supports:
- 1 x Internal Serial ATA 3.0Gb/s
- 1 x External Serial ATA 3.0Gb/s port on back I/O (SATA On-the-Go)
- Support SATA RAID 0, 1 and JBOD (by 1x External SATA & 1x Internal SATA)


LAN Dual Gigabit LAN controllers support NVIDIA DualNet® technology
NVIDIA nForce® 570 SLI™ MCP built-in dual Gigabit MAC with external Marvell PHY
- Support Teaming and Fail-Over functions
- Support TCP/IP Acceleration
Audio ADI 1988B 8-channel High Definition Audio CODEC
Support Jack-Sensing, Enumeration, Multi-streaming and Jack-Retasking
Coaxial, Optical S/PDIF out on back I/O port
IEEE 1394a TI 1394 controller supports 2 x 1394a ports
USB max.10 USB2.0/1.1 ports
Overclocking Features Intelligent overclocking tools:
-ASUS AI NOS™ (Non-delay Overclocking System)
-AI Overclocking (intelligent CPU frequency tuner)
-ASUS PEG Link (automatically performance tuning)
ASUS O.C. Profile: overclocking configuration-sharing tool

Precision Tweaker:
- vDIMM: 15-step DRAM voltage control
- vCore: Adjustable CPU voltage at 0.0125V increment
- Stepless Frequency Selection (SFS): allowing FSB tuning from 200MHz up to 400MHz at 1MHz increment
- PCI Express x16 Frequency from 100MHz up to 200MHz at 1 MHz increment

Overclocking Protection:
- ASUS C.P.R.(CPU Parameter Recall)
ASUS AI Booster Utility
Adjustable FSB frequencies with fixed PCI/PCI Express frequencies
Special Features ASUS EZ DIY:
-ASUS Q-Connector
-ASUS CrashFree BIOS3
-ASUS EZ Flash2
ASUS Music Alarm
Back Panel I/O Ports 1 x PS/2 Keyboard port(purple)
1 x PS/2 Mouse (green)
1 x Optical S/PDIF Out port + 1 x Coaxial S/PDIF Out port
1 x External SATA
2 x LAN (RJ45) port
4 x USB 2.0/1.1 ports
1 x IEEE 1394a port
1 x COM port
8-channel Audio ports
Internal I/O Connectors 3 x USB 2.0 connectors support additional 6 USB 2.0 ports
1 x Floppy disk drive connector
1 x IDE connector for two devices
7 x SATA connectors
1 x CPU / 4 x Chassis / 1 x Power Fan connectors
1 x ADH connector
1 x IEEE1394a connector
1 x Parallel connector
Chassis Intrusion connector
Front Panel Audio connector
1x S/PDIF output connector
CD audio in
24-pin ATX Power connector
System panel connector
4-pin ATX 12V Power connector
BIOS 4Mb AWARD BIOS, PnP, DMI, WfM2.0, SM BIOS 2.3
Manageability WOL by PME, WOR by PME, Chasis Intrusion, PXE
Accessories 1 x SLI bridge
1 x ASUS Q-Connector Kit(USB, 1394, system panel; Retail version only)
1 x ASUS Array Mic
1 x UltraDMA 133/100/66 cable
1 x Floppy disk drive cable
6 x SATA cables
3 x SATA power cable for 6 devices
1 x 2-port USB2.0 module
1 x IEEE1394a port module
1 x I/O Shield
User's manual

Support CD Drivers
ASUS PC Probe II
ASUS Update
ASUS AI Booster
NVIDIA MediaShield™ RAID
Anti-virus software (OEM version)
Form Factor ATX Form Factor, 12"x 9.6" (30.5cm x 24.5cm)

CPU

AMD 4800+ (Dual Core 2.4ghz Per core)

Processor number 4800+
Processor socket Socket 939
Clock speed 2.4 GHz
Level 1 cache size 128 KB
Processor features AMD64 technology, PowerNow! technology, Enhanced Virus Protection, HyperTransport technology, Integrated memory controller

Ram

Description:
This is Kingston ValueRAM's 128M x 64-bit (1GB) DDR400 CL3 SDRAM

(Synchronous DRAM) memory module. The components on this module include sixteen

64M x 8-bit (16M x 8-bit x 4 Bank) DDR400 SDRAM in TSOP packages. This 184-pin

DIMM uses gold contact fingers and requires +2.6V. The electrical and mechanical

specifications are as follows:


Advanced Features:

Capacity: 1GB

DDR400 (Backward compatible to DDR333)

CAS Latency(CL): 3.0

184-pin DIMM

Clock Cycle Time (tCK) 5ns (min.) / 10ns (max.)

Row Cycle Time (tRC) 55ns (min.)

Refresh Row Cycle Time (tRFC) 70ns (min.)

Row Active Time (tRAS) 40ns (min.) / 70,000ns (max.)

Single Power Supply of +2.6V (+/- .1V)

Power (IDD0) 5.408 W (operating)

Operating Temperature 0o C to 70o C

Storage Temperature -55o C to +150o C

UL Rating 94 V - 0

Hope this is help

[xeovoex]

thanks about help

seen that nVIDIA quadro-plex thingy. looks good (for the editing part, CPU for rendering).