3DM3 HOME

Kage · 07-27-2006, 07:49 AM

Hey, here I am again.

I've custom designed a case for a computer that is going to be great at cooling:

I have the latest render so far here done in 3DS Max and Vray:

I plan to get the inside cages done today and also get the back part way done.

I then plan to place the best parts in there :D

Plus, of course, build Logitech z5500 speakers, and a monitor and setup like that.

Hope you like so far :)

EDIT:

The attached shot was the only latest render that was small enough and is just a front version of the one in the thread :)

*minimus* · 07-27-2006, 08:53 AM

Kage thats really awsome. were can i buy that computer cage :P haha cool consept man

Kage · 07-27-2006, 10:53 AM

Thanks alot :)

Time to do the back now I think.

Jason Thompson · 07-27-2006, 01:07 PM

EEWWW Nice work but Not practicle.. They have liquid cooled processors with pump. They also have fans that you can place into empty bays fro hard drives/ Cd. Plus they make cases with doors on the front to cover the cd/ floppy drives... The inside door holds an sir filter. Cd drives love to suck dirt inside of them. Not good to stick CPU on floor. Idea to help you design.

Kage · 07-27-2006, 01:21 PM

What?...

Its not going to be liquid cooled, and its only a 3D model...

Plus, theres windows on either side :p

The one of it lying down, was just for testing of the reflections, etc. Its a tower case at heart.

Plus, its my design. Whos they?...

Bjarmi · 07-27-2006, 02:39 PM

all i can say, is.. You are very good in 3ds max.. Nice modeling and texture, but the drawing.. hehe.. That was.. ok?

Kage · 07-27-2006, 02:49 PM

Thanks, and the drawing is only a sketch up of a design. Wasn't meant to be proffessional or anything, haha.

Just enough to know in my head what I'm doing basically, with no shading and what not.

Plus, it was done at 3am in the morning :p

This thread is only really about the 3D model, in which at the moment, the hard drive cage is being built and the back being built... I'm rather slow, as I render most of the time to test changes. I should stop.

THE GHOST · 07-27-2006, 08:58 PM

that is super cool design i realy like it ...i have a lot of designs ..but i can't mace any one of it that successfull because i draw very perfect drawing,so that, the design becames harder to model

Kage · 07-28-2006, 06:57 AM

Thanks :)

Precise drawing wasn't really my aim, as I was just using them to design with, not model with.

Kage · 07-29-2006, 06:47 AM

This is a render I did while out, which took over an hour, but it looks pretty impressive.

The back and insides are now underway, but these are renders before thats took place.

The quality of the renders will probably stay the same now though:

07-27-2006, 07:49 AM	#1 (permalink)
Kage Registered User View My Portfolio Join Date: May 2006 Location: UK Age: 21 Posts: 196 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 3	Computer case build (whole PC planned) Hey, here I am again. I've custom designed a case for a computer that is going to be great at cooling: I have the latest render so far here done in 3DS Max and Vray: I plan to get the inside cages done today and also get the back part way done. I then plan to place the best parts in there :D Plus, of course, build Logitech z5500 speakers, and a monitor and setup like that. Hope you like so far :) EDIT: The attached shot was the only latest render that was small enough and is just a front version of the one in the thread :) Attached Thumbnails __________________ Back here for good :D Check out my latest thread: http://www.3dm3.com/forum/f24/logitech-z-5500-a-14809/ Last edited by Kage; 07-27-2006 at 07:56 AM.

07-27-2006, 08:53 AM	#2 (permalink)
minimus SkoleSlasken View My Portfolio Join Date: Dec 2004 Location: Norway (Trondheim) Age: 18 Posts: 2,606 Blog Entries: 4 Thanks: 10 Thanked 61 Times in 58 Posts Rep Power: 6 Awards Showcase Total Awards: 11	Kage thats really awsome. were can i buy that computer cage :P haha cool consept man __________________ Det som ikke dreper deg gjør deg stærkere :thumbsup: Norge

07-27-2006, 10:53 AM	#3 (permalink)
Kage Registered User View My Portfolio Join Date: May 2006 Location: UK Age: 21 Posts: 196 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 3	Thanks alot :) Time to do the back now I think. __________________ Back here for good :D Check out my latest thread: http://www.3dm3.com/forum/f24/logitech-z-5500-a-14809/

07-27-2006, 01:21 PM	#5 (permalink)
Kage Registered User View My Portfolio Join Date: May 2006 Location: UK Age: 21 Posts: 196 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 3	What?... Its not going to be liquid cooled, and its only a 3D model... Plus, theres windows on either side :p The one of it lying down, was just for testing of the reflections, etc. Its a tower case at heart. Plus, its my design. Whos they?... __________________ Back here for good :D Check out my latest thread: http://www.3dm3.com/forum/f24/logitech-z-5500-a-14809/

07-27-2006, 02:49 PM	#7 (permalink)
Kage Registered User View My Portfolio Join Date: May 2006 Location: UK Age: 21 Posts: 196 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 3	Thanks, and the drawing is only a sketch up of a design. Wasn't meant to be proffessional or anything, haha. Just enough to know in my head what I'm doing basically, with no shading and what not. Plus, it was done at 3am in the morning :p This thread is only really about the 3D model, in which at the moment, the hard drive cage is being built and the back being built... I'm rather slow, as I render most of the time to test changes. I should stop. __________________ Back here for good :D Check out my latest thread: http://www.3dm3.com/forum/f24/logitech-z-5500-a-14809/ Last edited by Kage; 07-27-2006 at 02:53 PM.

07-27-2006, 01:07 PM	#4 (permalink)
Jason Thompson mrbunnylamakins View My Portfolio Join Date: Jun 2006 Location: Usa, Fort Wayne Age: 33 Posts: 3 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 0	EEWWW Nice work but Not practicle.. They have liquid cooled processors with pump. They also have fans that you can place into empty bays fro hard drives/ Cd. Plus they make cases with doors on the front to cover the cd/ floppy drives... The inside door holds an sir filter. Cd drives love to suck dirt inside of them. Not good to stick CPU on floor. Idea to help you design.

07-27-2006, 02:39 PM	#6 (permalink)
Bjarmi Registered User View My Portfolio Join Date: Jul 2006 Posts: 11 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 0	all i can say, is.. You are very good in 3ds max.. Nice modeling and texture, but the drawing.. hehe.. That was.. ok?

07-27-2006, 08:58 PM	#8 (permalink)
THE GHOST Registered User View My Portfolio Join Date: Apr 2006 Location: UAE, Abu Dhabi Age: 17 Posts: 320 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 3 Awards Showcase Total Awards: 3	that is super cool design i realy like it ...i have a lot of designs ..but i can't mace any one of it that successfull because i draw very perfect drawing,so that, the design becames harder to model Last edited by THE GHOST; 07-27-2006 at 09:04 PM.

07-28-2006, 06:57 AM	#9 (permalink)
Kage Registered User View My Portfolio Join Date: May 2006 Location: UK Age: 21 Posts: 196 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 3	Thanks :) Precise drawing wasn't really my aim, as I was just using them to design with, not model with. __________________ Back here for good :D Check out my latest thread: http://www.3dm3.com/forum/f24/logitech-z-5500-a-14809/

07-29-2006, 06:47 AM	#10 (permalink)
Kage Registered User View My Portfolio Join Date: May 2006 Location: UK Age: 21 Posts: 196 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 3	This is a render I did while out, which took over an hour, but it looks pretty impressive. The back and insides are now underway, but these are renders before thats took place. The quality of the renders will probably stay the same now though: __________________ Back here for good :D Check out my latest thread: http://www.3dm3.com/forum/f24/logitech-z-5500-a-14809/

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)