11-03-2006, 04:37 AM
| #1 (permalink) |
| 3DM Administrator   Join Date: May 2002 Location: Ukraine Age: 24
Posts: 3,317
Blog Entries: 19 Thanks: 58
Thanked 36 Times in 31 Posts
Rep Power: 10  | SPEED MODELLING COMPETITION No.21 (Mug) Hi everyone and Welcome to 3dm3 Speed Modelling Competition New Speed Modelling Challenge is here! Subject: Mug Description: I am reffering to the heavy; usually cylinderical; cup with a handle. You can go crazy on the desighns ofcourse but you have to stick to the general intentions of a mug. Modeling Time: 3 hours Start: Friday, 3rd November at 12:00 am GMT End: Sunday, 12th November at 12:00 am GMT PLEASE READ GENERAL RULES Post your entries in this thread! Here are some quick rules if you guys feeling lazy to read and ready to model :thumbsup: - Competition is open to everyone and anyone, worldwide - Model must be created by a single artist - Multiple submissions are permitted either - Your submission should be a model created especially for this challenge and not one you have previously created for own purpose. - Entries using models which are not original will be removed and the Poster will be disqualified for the current competition - Take your time and model, do not make haste to post a 10 minute model! - Describe how you created your model, references used, Methods or Techniques, This is not necessary but might make your chances better to win and for others to learn, after all, we do it for learning and Fun! - Always Cast your Vote on the Poll system, Thank You IMPORTANT CHANGE IN RULES, click here Main Technical terms: - You can use any 3d Package - Attach Only 2 images (Rendered and Wireframe) - For Wireframe, ONLY use Screengrab Process (PrintScreen) from Perspective View ONLY, No other methods of Wire Rendering allowed! - Do not forget to post your Modelling time - Texturing is allowed but not necessary - You can also post WIP Images but do not Overload the Forum! LOOK PREVIOUS CHALLENGES, click here Let your creativity flow! :thumbsup: let's start and good luck to everyone. 
__________________ 3DExport.com - 3D Models Store 2Textured.com - FREE High-Res Textures CGChosen.com - CG Chosen E-magazine |
|  |
|
11-05-2006, 04:55 AM
| #8 (permalink) |
| Registered User Join Date: Oct 2006
Posts: 12
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0 | Here is my quick entry. It is a glass mug modelled in Lightwave 9. Modelling time : 20 mins Texturing/Surfacing : 30 mins Renders : 10 mins For the benefit of others, i used a disc tool and beveled it in, chopped polygons for the handle, which was beveled. I then beveled the bottom out then in to create a unique bottom. I then beveled in to create the rest of the mug. The whole model was then subpathed/smoothed. Hope you enjoy and may we see alot better entries :yaya: |
|
| |
|
11-05-2006, 05:53 AM
| #9 (permalink) |
| 3DM Administrator Join Date: May 2002 Location: Ukraine Age: 24
Posts: 3,317
Blog Entries: 19 Thanks: 58
Thanked 36 Times in 31 Posts
Rep Power: 10 | Good first entries :D Not bad for 20 mins :)
__________________ 3DExport.com - 3D Models Store 2Textured.com - FREE High-Res Textures CGChosen.com - CG Chosen E-magazine |
|
| |
|
11-05-2006, 06:43 AM
| #10 (permalink) |
| Registered User  Join Date: Sep 2006 Location: Portugal, Braga Age: 17
Posts: 96
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 2 | Mug Here's my first entry in a speed modeling contest here in 3dm3, Hope you like it... Modeling: 30 min lightning and textures: 10min Render: an entire night (~9hours) (edit): Software used 3d studio max 8 to model and maxwell to render... Well i started with a spline and lathed it, then i transformed it into a editable poly, meshsmoothed it and detached/cloned the center polys, then i created some boxes with the shape of the holes and arrayed them, after that i subtracted them to the detached/cloned poly and finaly i created a box and modeled it to the shape of the handle and meshsmoothed it.... Last edited by Joiko; 11-08-2006 at 01:22 PM. |
|
| |
|
11-05-2006, 11:35 AM
| #12 (permalink) |
| Registered User  Join Date: Mar 2006 Location: Copenhagen, Denmark Age: 18
Posts: 224
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 3  |  My entry Hi everybody! Here's my entry. I went for design mainly with this one. I wanted to combine the ceramics with the steel and crome, to give it a bit of a rough look. The brushed steel on the inside of the mug, not only looks great, but also keep the tea, coffee (or whatever the mug might contain), warm. I hope you like it: Modeling time: 40-50 minutes Render time: About 20 minutes Texturing/Material editing time: 20-30 minutes Last edited by Anifacted; 11-05-2006 at 05:00 PM. |
|
| |
|
11-05-2006, 01:37 PM
| #15 (permalink) |
| Registered User Join Date: Nov 2006 Age: 17
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
Rep Power: 0 | Very nice you two. But Maksy, that is a cup, not a mug .. :) Btw. are multiple entries allowed ? I'm not going to upload my mug now.. After seeing these, I gotta make a new one :cry: Last edited by Kasplatt; 11-05-2006 at 01:47 PM. |
|
| |
