3dm3

SPWAR · 03-22-2007, 05:02 AM

Hi everyone and Welcome to 3dm3 Speed Modelling Competition

New Speed Modelling Challenge is here!

Subject: Too Antique

Description: This time let's have fun modeling very old stuff that seem to be very expensive. Use your imagination and creativity to reveal original ideas! Improve your modeling abilities!
Modeling Time: 5 hours
Start: Thursday, 22nd March at 12:00 am GMT
End: Monday, 1st April at 12:00 am GMT

PLEASE READ GENERAL RULES

(Sorry for starting later than promissed. It's caused by some technical reasons which would never appear in future)

Post your entries in this thread!

Here are some quick rules if you guys feeling lazy to read and ready to model :happy:

- Competition is open to everyone and anyone, worldwide
- Model must be created by a single artist
- Multiple submissions are permitted either
- Your submission should be a model created especially for this challenge and
not one you have previously created for own purpose.
- Entries using models which are not original will be removed and the
Poster will be disqualified for the current competition
- Take your time and model, do not make haste to post a 10 minute model!
- Describe how you created your model, references used, Methods or
Techniques, This is not necessary but might make your
chances better to win and for others to learn, after all, we do it for learning
and Fun!
- Always Cast your Vote on the Poll system, Thank You

IMPORTANT CHANGE IN RULES, click here

Main Technical terms:

- You can use any 3d Package
- Attach Only 2 images (Rendered and Wireframe)
- For Wireframe, ONLY use Screengrab Process (PrintScreen) from Perspective
View ONLY, No other methods of Wire Rendering allowed!
- Do not forget to post your Modelling time
- Texturing is allowed but not necessary
- You can also post WIP Images but do not Overload the Forum!

LOOK PREVIOUS CHALLENGES, click here

Don't be too antique! Take part in speed challenges :)

Good luck!

03-22-2007, 07:18 PM

Im going to enter this one Ill get started on this one right away

*minimus* · 03-23-2007, 08:40 AM

arrggg...i have so many ideas but i think they are to big for 5 hours :P hehe

Stinger88 · 03-23-2007, 04:26 PM

Hi everyone.

This is my first try at a speed modelling challenge. I thought I'd give it a go as it will help me bulk my Portfolio up for college and aid my skillz in modelling.

I've been waiting for this challenge to start all week and as soon as I found out what the subject was, for some reason an old pocket watch jumped to mind. So I got some pictures for reference. Then got on with it basically. There isn't much to say about the model itself as its a bunch of Loft nurbs, Torusi (or torus's whatever) Splines nurbs and booles. Theres a couple of bump maps one for the stamp under the lid and another for the scratches on the glass surface. The watch probably isn't 100% correct to a antique watch expert as I took bits from a few different ones. And a bit more wear and tear on the textures would have looked good. I also wanted to have the face open to see some cogs underneath but I reckon I would have gone over the time limit if I got too detailed.

As its my 1st time please tell me if anything isn't complying with the rules.

Anyway...here it is. Hope you like it.

BTW great challenge and I look forward to the next one.

Modelling time: 4 hours
Texturing time: 30 mins
Rndering time: 5 mins
Software: Cinema 4D

Eetwartti · 03-23-2007, 05:31 PM

Stinger88 : Vey nice entry! The modelling is good and you've done great work with the textures, too!

I made a clock, too, but it's a bit bigger one than stinger's...

modelling (3dsmax 9) - 2,5 hours
materials & scene setup - 45 minutes
rendering (VRay) - I think it was around 10 minutes.

03-24-2007, 05:35 AM

Good work comrades, i'll take part in challenge soon, it should be interesting :idea2:

Elyu · 03-24-2007, 07:01 AM

Hi man, this is the first time that i do the speed modeling, so tell me if i've done something wrong.(sorry of bad Eng.)

Modeling by 3ds max 7(student version)
Rendering by Vray 1.5
modeling = 23min
texture = 15min
rendering = 52sec

bharat yatna · 03-24-2007, 07:22 AM

everybody is doing great here,i hope i cud make a place here,i ll also submit sumthing here,all the best to all of us!
great challenge!

**Stryker** · 03-24-2007, 07:52 AM

cool topic!

*Dyablo213619* · 03-24-2007, 05:42 PM

Can I create like a pokemon model or does have to be my own original Idea

03-25-2007, 06:35 AM

This here is my first ever try at a speed modelling challenge. It is an old style candle holder.

Modelling: 55 min
texturing: 10 min
rendering: 2minutes
Software: 3ds Max 7

jidoman · 03-25-2007, 09:53 AM

hi, this is my entry

hadn´t time for dust but here it is

modelling (3dsmax 8 ) - 1,5 hours
materials & scene setup - 30 minutes
rendering (VRay) - around 20 minutes

bharat yatna · 03-25-2007, 02:09 PM

antique knife

modeling time
3 hours
lights
23 minutes

*Dyablo213619* · 03-25-2007, 03:55 PM

Well Heres mine it's not that great.

modelling (3dsmax 9 ) - 45 minutes
texturing & scene setup - 30 minutes
rendering - 3 minutes

Monkey Wrench · 03-25-2007, 04:23 PM

wow, really nice watch stinger88!

03-22-2007, 05:02 AM	#1 (permalink)
SPWAR Registered User View My Portfolio Join Date: May 2002 Location: Ukraine Posts: 156 Thanks: 0 Thanked 2 Times in 2 Posts Rep Power: 11 Awards Showcase Total Awards: 2	SPEED MODELING CHALLENGE No 25 (Too Antique) Hi everyone and Welcome to 3dm3 Speed Modelling Competition New Speed Modelling Challenge is here! Subject: Too Antique Description: This time let's have fun modeling very old stuff that seem to be very expensive. Use your imagination and creativity to reveal original ideas! Improve your modeling abilities! Modeling Time: 5 hours Start: Thursday, 22nd March at 12:00 am GMT End: Monday, 1st April at 12:00 am GMT PLEASE READ GENERAL RULES (Sorry for starting later than promissed. It's caused by some technical reasons which would never appear in future) Post your entries in this thread! Here are some quick rules if you guys feeling lazy to read and ready to model :happy: - Competition is open to everyone and anyone, worldwide - Model must be created by a single artist - Multiple submissions are permitted either - Your submission should be a model created especially for this challenge and not one you have previously created for own purpose. - Entries using models which are not original will be removed and the Poster will be disqualified for the current competition - Take your time and model, do not make haste to post a 10 minute model! - Describe how you created your model, references used, Methods or Techniques, This is not necessary but might make your chances better to win and for others to learn, after all, we do it for learning and Fun! - Always Cast your Vote on the Poll system, Thank You IMPORTANT CHANGE IN RULES, click here Main Technical terms: - You can use any 3d Package - Attach Only 2 images (Rendered and Wireframe) - For Wireframe, ONLY use Screengrab Process (PrintScreen) from Perspective View ONLY, No other methods of Wire Rendering allowed! - Do not forget to post your Modelling time - Texturing is allowed but not necessary - You can also post WIP Images but do not Overload the Forum! LOOK PREVIOUS CHALLENGES, click here Don't be too antique! Take part in speed challenges :) Good luck!

03-23-2007, 08:40 AM	#3 (permalink)
minimus SkoleSlasken View My Portfolio Join Date: Dec 2004 Location: Norway (Trondheim) Age: 21 Posts: 2,964 Thanks: 14 Thanked 104 Times in 97 Posts Rep Power: 10 Awards Showcase Total Awards: 12	arrggg...i have so many ideas but i think they are to big for 5 hours :P hehe __________________ Det som ikke dreper deg gjør deg stærkere :thumbsup: Norge Temp Home page: http://quad3d.webs.com

03-23-2007, 04:26 PM	#4 (permalink)
Stinger88 Registered User View My Portfolio Join Date: May 2007 Posts: 39 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 0 Awards Showcase Total Awards: 4	5 oclock shadow Hi everyone. This is my first try at a speed modelling challenge. I thought I'd give it a go as it will help me bulk my Portfolio up for college and aid my skillz in modelling. I've been waiting for this challenge to start all week and as soon as I found out what the subject was, for some reason an old pocket watch jumped to mind. So I got some pictures for reference. Then got on with it basically. There isn't much to say about the model itself as its a bunch of Loft nurbs, Torusi (or torus's whatever) Splines nurbs and booles. Theres a couple of bump maps one for the stamp under the lid and another for the scratches on the glass surface. The watch probably isn't 100% correct to a antique watch expert as I took bits from a few different ones. And a bit more wear and tear on the textures would have looked good. I also wanted to have the face open to see some cogs underneath but I reckon I would have gone over the time limit if I got too detailed. As its my 1st time please tell me if anything isn't complying with the rules. Anyway...here it is. Hope you like it. BTW great challenge and I look forward to the next one. Modelling time: 4 hours Texturing time: 30 mins Rndering time: 5 mins Software: Cinema 4D Attached Thumbnails Last edited by Stinger88; 03-23-2007 at 05:28 PM..

03-23-2007, 05:31 PM	#5 (permalink)
Eetwartti Registered User View My Portfolio Join Date: Oct 2006 Location: Finland, Tampere Age: 22 Posts: 25 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 0 Awards Showcase Total Awards: 4	Stinger88 : Vey nice entry! The modelling is good and you've done great work with the textures, too! I made a clock, too, but it's a bit bigger one than stinger's... modelling (3dsmax 9) - 2,5 hours materials & scene setup - 45 minutes rendering (VRay) - I think it was around 10 minutes. Attached Thumbnails

03-24-2007, 07:01 AM	#7 (permalink)
Elyu Registered User View My Portfolio Join Date: May 2007 Location: China Posts: 192 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 6	Hi man, this is the first time that i do the speed modeling, so tell me if i've done something wrong.(sorry of bad Eng.) Modeling by 3ds max 7(student version) Rendering by Vray 1.5 modeling = 23min texture = 15min rendering = 52sec Attached Thumbnails

3dm3

SECTIONS

COMMUNITY

COMPANY

NETWORKS

03-22-2007, 07:18 PM	#2 (permalink)
darkicestudios Guest View My Portfolio Posts: n/a	Im going to enter this one Ill get started on this one right away

03-24-2007, 05:35 AM	#6 (permalink)
targus Guest View My Portfolio Posts: n/a	Good work comrades, i'll take part in challenge soon, it should be interesting :idea2:

03-24-2007, 07:22 AM	#8 (permalink)
bharat yatna Registered User View My Portfolio Join Date: Nov 2006 Location: India Age: 24 Posts: 128 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 6	everybody is doing great here,i hope i cud make a place here,i ll also submit sumthing here,all the best to all of us! great challenge!

03-24-2007, 07:52 AM	#9 (permalink)
Stryker 3DM3 Administrator View My Portfolio Join Date: May 2002 Age: 27 Posts: 3,708 Thanks: 84 Thanked 114 Times in 88 Posts Rep Power: 10	cool topic! __________________ 3DExport.com - 3D Models Store 2Textured.com - FREE High-Res Textures CGChosen.com - CG Chosen E-magazine

03-24-2007, 05:42 PM	#10 (permalink)
Dyablo213619 Forum Moderator View My Portfolio Join Date: Dec 2006 Location: Mexico City, Mexico Age: 21 Posts: 425 Thanks: 28 Thanked 60 Times in 47 Posts Rep Power: 0	Quick Question Can I create like a pokemon model or does have to be my own original Idea

03-25-2007, 06:35 AM	#11 (permalink)
darkicestudios Guest View My Portfolio Posts: n/a	This here is my first ever try at a speed modelling challenge. It is an old style candle holder. Modelling: 55 min texturing: 10 min rendering: 2minutes Software: 3ds Max 7 Attached Thumbnails

03-25-2007, 09:53 AM	#12 (permalink)
jidoman oldman View My Portfolio Join Date: Aug 2006 Location: castellon Age: 34 Posts: 430 Thanks: 0 Thanked 2 Times in 2 Posts Rep Power: 6 Awards Showcase Total Awards: 3	hi, this is my entry hadn´t time for dust but here it is modelling (3dsmax 8 ) - 1,5 hours materials & scene setup - 30 minutes rendering (VRay) - around 20 minutes Attached Thumbnails __________________ i work with vinyls now take a look : pegatinas redRadar

03-25-2007, 02:09 PM	#13 (permalink)
bharat yatna Registered User View My Portfolio Join Date: Nov 2006 Location: India Age: 24 Posts: 128 Thanks: 0 Thanked 0 Times in 0 Posts Rep Power: 6	antique knife antique knife modeling time 3 hours lights 23 minutes Attached Thumbnails Last edited by bharat yatna; 03-25-2007 at 02:27 PM..

03-25-2007, 03:55 PM	#14 (permalink)
Dyablo213619 Forum Moderator View My Portfolio Join Date: Dec 2006 Location: Mexico City, Mexico Age: 21 Posts: 425 Thanks: 28 Thanked 60 Times in 47 Posts Rep Power: 0	Well Heres mine it's not that great. modelling (3dsmax 9 ) - 45 minutes texturing & scene setup - 30 minutes rendering - 3 minutes Attached Thumbnails Last edited by Dyablo213619; 03-25-2007 at 03:58 PM..

03-25-2007, 04:23 PM	#15 (permalink)
Monkey Wrench Maya novice View My Portfolio Join Date: Dec 2006 Age: 22 Posts: 48 Thanks: 1 Thanked 0 Times in 0 Posts Rep Power: 0	wow, really nice watch stinger88!

LinkBacks (?) LinkBack to this Thread: http://www.3dm3.com/forum/f100/speed-modeling-challenge-no-25-too-antique-8635/
Posted By	For	Type	Date
Welcome to 3DM3.com - World's Computer Graphics Community	This thread	Refback	01-08-2008 03:53 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)